Latest news: --- looking for metafiles ISF2.8-3.8 and ISle4 for calterm III --- Electrical Shematic ( C10, C12, C15 , C16 , 3126B and 3126E) --- Older TIS --- Hyundai santa fe 2.2 crdi 2007 edc16c39 dump file check --- Renault CAN-CLIP Version 165 --- Hyundai santa fe 2.2 crdi 2007 edc16c39 dump file --- tuned file citroen berlingo --- Fiat punto 2003 --- Inpower 11.5 --- JCB Printing Out Manual Completely Not One Page At Time --- Vocom Device Driver/Firmware Update (Version 2.0.3.0) --- Detroit Diesel Diagnostic Link (DDDL) 7x keygen --- Porsche PET 7.3 Update 4140 [02.2017] Multilingual --- Toyota Techstream 12.00.124 --- Windows 10 upgrade orijinal --- Please Help --- Scania Multi 10 2016 --- Mazda 6 2011 customization feature --- Dpffiles.com Service,EGR DPF VSA OFF Ect !!! --- elsawim SEAT 5.2 01.2015 (1) ---
  
To Obtain Your Registration "CODE"AP Forum, Please Send A Request To: autoprofessionals@mail.ru

If you can not register is possible your IP is block please reboot Router or use a diferent network .


 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2000 impala BCM
#1
GM 
i have replaced my BCM and use the tech 2 to set everything up. but when i turn the key over nothing happens. everything powers up but the starter will not work. the security does not come on, so cant be the passkey right? i put the old box back in and the car starts and runs. but i have trouble with the trunk popping open, random info popping up in the message box like low engine oil, low coolant. Now this is the BCM causing the trouble right? from what i can read on the web.
Reply
Thanks given by:
#2
You have to program the BCM with J2534 and a subscription with GM.
You will also need a document to update the correct programming with possible security.

Most that I do, security is included while performing the update.
Reply
Thanks given by:
#3
(04-06-2015, 09:08 PM)Ecmbuster Wrote:  You have to program the BCM with J2534 and a subscription with GM.
You will also need a document to update the correct programming with possible security.

Most that I do, security is included while performing the update.

i got it. i forgot to run the theft deterrent relearn program! thanks for the help
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)