Latest news: --- new sdp3 2.45.1 --- Kess v2 ecu remapping kit rooven1 --- Delphi Ds150e new vci kit obd rooven1 --- Panasonic CF 54 with Piwis 3 V39.900, Pet2 and some spezial Features --- Remote Install - HDS, EPC --- Mondeo 2.0 tdci cutting out --- PET2 Update 5800 Multilingual is availeble --- renault NEW DIALOGYS password --- SUZUKI SDT-2_soft_2263005 --- MB Star SD Connect C5 DoIP New Arrival --- Harley Davidson Service Manual --- Harley-Davidson Models Updated 2019 Service Manuals & EWD --- AlfaOBD_2.1.9.4 --- Renault DDT2000 4.0.9.2 (patch inside) + Bases 07.2020 - Mega --- Navegador VW Passat --- Porsche Piwis 3 V39.800 is availeble. --- CASE-SERVICE MANUAL-OPERATORS MANUAL-ALL --- Revo Uninstaller Pro 4.3.0 Full - Free For All --- Piwis 3 Ready to use V39.800 SSD incl.Keygenerator --- PIWIS 3 V39.800 Update is availeble ---
  
Thank You For Your Registration AP Forum!!! We Wish You A Good Time AutoProfessionals.Org Forum!!!

Attention! Don’t Wait For Your Registration Code You EMAIL.. Your Account Will Be Activated Automatically Within 15 Minutes FREE.. Please Stay With Us And Go To The Forum. "you Acaunt"





Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nissan Idle Air Volume Learn adjustment without Consult or Scan-tool.
#1
Nissan 
NISSAN.

Accelerator Pedal Released Position Learning
DESCRIPTION
Accelerator Pedal Released Position Learning is an operation to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position sensor or ECM is disconnected.

OPERATION PROCEDURE
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF and wait at least 10 seconds.

BASIC SERVICE PROCEDURE
2007 Armada

Throttle Valve Closed Position Learning
DESCRIPTION
Throttle Valve Closed Position Learning is an operation to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected.

OPERATION PROCEDURE
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch OFF wait at least 10 seconds.
Make sure that throttle valve moves during above 10 seconds by confirming the operating sound.

IDLE AIR VOLUME LEARN (Manually)
1. Perform Accelerator Pedal Released Position Learning.
2. Perform Throttle Valve Closed Position Learning.
3. Start engine and warm it up to normal operating temperature.
4. Check that all items listed under the topic PREPARATION (previously mentioned) are in
good order.
5. Turn ignition switch OFF and wait at least 10 seconds.
6. Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds.
7. Repeat the following procedure quickly five times within 5 seconds.
a. Fully depress the accelerator pedal.
b. Fully release the accelerator pedal.
8. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds
until the MIL stops blinking and turned ON.
9. Fully release the accelerator pedal within 3 seconds after the MIL turned ON.
10. Start engine and let it idle.
Reply
Thanks given by: sweetsam , djodjon


Forum Jump:


Users browsing this thread: 1 Guest(s)