To Obtain Your Registration "CODE"AP Forum, Please Send A Request To: autoprofessionals@mail.ru

If you can not register is possible your IP is block please reboot Router or use a diferent network .


 
Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BMW ISPI NEXT 3.47.10 + ISTAP 54.3.002 + Loader V2.0 for (K/DCAN) + Clone HDD
#1
BMW 
[Image: 1feeacccd3c6a2848eefd04bd292570b.jpg]
BMW ISPI NEXT 3.47.10 + ISTAP 54.3.002 + Loader V2.0 for (K/DCAN) + Clone HDD
Size: 54.22 GB Type: Auto

Year / Date of Release: 2014
Language: Multilingual (Russian present)
Medicine: Present
Description:
The new system diagnostics of cars BMW. Works with E and F series. BMW Rheingold is the replacement of the diagnostic program
BMW ISTA / D versions 2.XX. At


BMW ISTA-D RHEINGOLD 3.47.10 (American, English, German, Russian, Chinese, French, Swedish, Turkish, Spanish, Korean, Portuguese, Japanese, Italian languages)

Module (ECU) errors reading and clearing
Gearbox (transmisson) and engine adaptations erasing
Fuel injectors controll, correction amount real time viewing, injector regestering
Engine mountings testing
Mass air flow (MAF) testing and regestering. Whole air system testing
EGR system controll and testing
Turbocharger and related components controll and testing
Diesel particulate filter regeneration (DPF)
Battery replacement
Oil change and service interval reset
Wiring diagrams, live data, repair instructions, technical documents etc
And many more other functions


BMW ISTA-P 3.54.3.002 Multilanguage + Expert Mode (single module programming)

Battery type change
Module (ECU) software updating, coding and replacement
Vehicle retrofitting, options enabling and disabling
Choose ISTA-P language directly from ISTA-P taskbar agent
And many more other functions




Year / Release Date: 2015.01
Version: 2.0 (beemerboy88)
System requirements: Windows
Language: English
License: Freeware
Description: Works on all versions of ISTA / P, ISPI NEXT
Automatic detection of ICOM
Automatic detection of ISTA / P location of the installation
language Selection
The choice of screen resolution
The choice of the brand BMW and Mini
Option to reset / dealerdata
V2.0 new features / changes
Native emulator added to provide K + DCAN USB cable for use with ISTA / P without VMware
Kl15 ignition control added to the K + DCAN (visible only when the emulator is running).
Icon notification added with manual disconnection.
Loader is now minimized in the system tray to launch ISTA / P (safe imrezh not to cover it by mistake)
Desktop Icon display problem fixed (applies to Windows XP)
Some code improvements and minor bug fixes.
Extras. Information: How to set (please read this and follow the instructions exactly).
1. First turn off the anti-virus and run the network configuration tool (NetworkTool.exe) (IMPORTANT - should be launched, otherwise the emulator will not work).
Note: for this will be required about 30 seconds.
Then, check the network connection, you should see the network connection USB.
pic
2. Install the .NET 4 (do not skip this step - loader does not work if it is not installed).
Note: Windows XP NET Framework 2 and 4 must be set
3. Install the Java Runtime (do not skip this step - loader does not work if it is not installed).
4. Install pacheny Ediabas 7.3.
5. Copy the boot loader for your desktop.
How to use a K + DCAN
First, set your K + DCAN cable and configure COM-port (the default port number for propachenogo EDIABAS is COM9).
1. Disable the firewall and disable Wi-Fi.
2. Connect the K + DCAN cable and connect the cable to the machine.
3. Run the loader
4. Click "Start, K + DCAN ICOM button emulation" once. Then wait until a prompt appears for the emulator.
5. Press BMW or Mini brand. Now nachnetsa ISTA / P run.
6. Select the K + DCAN in connection manager.
Note: when ISTA / P asks ignition on / off programming Kl15 use controls located in the notification area on the taskbar (right-click on the ISTA / P notification icon). Default value: "ON". During operation programa requests to turn off / on the car ignition.
pic
How to close the ISTA / P ????
Close / P window ISTA. The boot loader then safely turn off everything. You can also use the power button on the notification icon ISTA / P.


Attached Files
BMW ISPI NEXT 3.47.10 + ISTAP 54.3.002 + Loader V2.0 for (KDCAN) + Clone HDD.txt
File Type: .txt
Downloaded: 1,772 times
Size: 64 bytes

Reply
#2
No Problem ;)
Reply
Thanks given by:
#3
Hallo Dealirio,

thank you for upload.
But I have few questions. After installation with this yt video I can't start ISTA-D. Error "ATTENTION !!! This device has not been registered. Please do it, before you launch the application."
What means that??
In ISTA-P I can't open XP expert mode. How to do that? Which password is the right one? When I type istap then I get traceroute configuration only. How to choose K/DCAN cable or language? What I have done wrong?
Is there any better installation manual for this complex installation???
Your description above is bad English. :(
1. Where to find this tool: "run the network configuration tool (NetworkTool.exe)"?
2. Where to get this: "4. Install pacheny Ediabas 7.3."? With ISTA Ediaba v7.2 is installed??!
3. What the hell means that? "Now nachnetsa ISTA / P run."
Reply
Thanks given by:
#4
I can't start ISTA-D.
Error "ATTENTION !!! This device has not been registered. Please do it, before you launch the application."
I have used ID.reg, the situation is still the same.
Will there any way to solve Thank you.


I again Copy and execute ISTAGUI.exe.config、Volumeid.exe、ID.reg after the issue is resolved.
Reply
Thanks given by:
#5
(05-17-2015, 05:28 AM)hsuchiawen Wrote:  I can't start ISTA-D.
Error "ATTENTION !!! This device has not been registered. Please do it, before you launch the application."
I have used ID.reg, the situation is still the same.
Will there any way to solve Thank you.



BUT DID YOU CHANGED THE HARD DISK SERIAL ?
Reply
Thanks given by:
#6
Hello.

All works well in ISTA/P, but in ISTA/D, in connection manager, my ICOM shows as reserved and doesn't allow me to connect to it.
Anyone know how to resolve this?

Thanks!
Reply
Thanks given by:
#7
(05-26-2015, 09:02 PM)505 Wrote:  Hello.

All works well in ISTA/P, but in ISTA/D, in connection manager, my ICOM shows as reserved and doesn't allow me to connect to it.
Anyone know how to resolve this?

Thanks!


Hello,

You need to update the firmware of your icom interface
Reply
Thanks given by:
#8
(05-27-2015, 08:24 AM)jonaszor Wrote:  
(05-26-2015, 09:02 PM)505 Wrote:  Hello.

All works well in ISTA/P, but in ISTA/D, in connection manager, my ICOM shows as reserved and doesn't allow me to connect to it.
Anyone know how to resolve this?

Thanks!


Hello,

You need to update the firmware of your icom interface


What version of firmware should the ICOM interface be updated to?
Reply
Thanks given by:
#9
hi i downloaded everything but zip file has a password?
Reply
Thanks given by:
#10
there is no networktool?!
Reply
Thanks given by:


Possibly Related Threads...
Thread Author Replies Views Last Post
BMW BMW ISPI NEXT 3.53.13 ISTA-P 3.57.4.003 torrent shauto 4 13,019 09-08-2016, 04:19 PM
Last Post: djromeo
  BMW DISV57_CIPV44_K+DCAN Interface VMware Image italianec 1 888 08-02-2016, 11:58 AM
Last Post: Alexandru.k_24
BMW BMW Group ISPI NEXT Wallpaper conexion 0 788 05-12-2016, 09:19 PM
Last Post: conexion
BMW BMW ISPI Next ISTA/P 3.55.0.300, 3.55.1.001 Torrent Administrator 5 7,647 02-06-2016, 02:01 PM
Last Post: DaKiNeS
BMW BMW DASH V2.10 software (Clone) B.M.W 1 3,078 02-02-2016, 03:18 PM
Last Post: Edo
  BMW_ISPI_ISTA-P_DAT_3.56.4.003.istap 437.4 MB BMWF01 0 1,067 09-17-2015, 11:36 AM
Last Post: BMWF01
  istad 3.50.10 + istap 3.56.1.002 WildCard 7 6,394 08-19-2015, 06:27 PM
Last Post: WildCard
BMW BMW ISPI NEXT 3.48.10 - on Mega nhoc_haycuoi 1 1,798 03-04-2015, 04:49 PM
Last Post: krzysasd
BMW BMW ISTA-P Loader V2.0 K+DCAN 2015.1 Torrent Administrator 0 5,808 01-21-2015, 06:55 PM
Last Post: Administrator

Forum Jump:


Users browsing this thread: 3 Guest(s)